Contact us
Energy-saving chiller for cooling water
Due to the use of compressors on magnetic bearings, savings are up to 30%
Advantages of the Kingfit magnetic bearing chiller
- 1EconomyElectricity consumption is up to 50% less than that of other types of chillers.
Extremely small starting current of 2A.
The highest CMR in the industry is 6.48 at 100% load.
Highest IPLV in the industry is 10.82. - 2Environmentally friendlyUse of environmentally friendly refrigerant HFC134a, without ozone-depleting capacity and without a phase-out date in accordance with the Montreal Protocol.
- 3Energy efficiencyOil-free operation eliminates a complex oil system, reducing operating and maintenance costs.
Preventing the effect of an oil film covering the heat exchanger in a shell-and-tube heat exchanger, which reduces the heat exchange efficiency. - 4DurabilityThe absence of mechanical bearings, which over time of replacement significantly extends the life cycle of the chiller.
- 5InnovationThe use of the patented falling film technology in the evaporator allows direct cooling of water from a temperature of +6 °C to a temperature of +1 °C.
Features of the design of the chiller on magnetic bearings Kingfit
Accurate temperature control ±0.1°C. Liquid cooling up to -15 °C.
Starting current 2A, which reduces the impact on the power grid. The use of magnetic bearing technology with ultra-low noise characteristics in compressors results in quiet operation. The main shafts of the compressors rotate at a very high speed without any mechanical contact. Costs are reduced due to the absence of oil.
Oil-free operation eliminates a complex oil system, resulting in lower operating and operating costs. (Avoidance of the effect of an oil film on the heat exchange surface of the shell and tube heat exchanger, which reduces the efficiency of heat exchange). Reduction of project costs and management efficiency. Multiple compressors are installed on a common evaporator and condenser, which provides a reduction and ensures efficiency in the operation of the equipment.
Starting current 2A, which reduces the impact on the power grid. The use of magnetic bearing technology with ultra-low noise characteristics in compressors results in quiet operation. The main shafts of the compressors rotate at a very high speed without any mechanical contact. Costs are reduced due to the absence of oil.
Oil-free operation eliminates a complex oil system, resulting in lower operating and operating costs. (Avoidance of the effect of an oil film on the heat exchange surface of the shell and tube heat exchanger, which reduces the efficiency of heat exchange). Reduction of project costs and management efficiency. Multiple compressors are installed on a common evaporator and condenser, which provides a reduction and ensures efficiency in the operation of the equipment.
Implemented projects with chillers
on Kingfit magnetic bearings
Dealer's certificate
